Material · SLA / MSLA
Resin Print Cost Calculator
Cost a resin print by volume at your price per litre, then add the consumables that resin printing actually uses — IPA for washing, gloves, and FEP film wear — each as its own line. Enter your own numbers; nothing here prescribes how you should handle materials safely.
Resin & consumables
resin = 40 mL × $0.05/mL = $1.80
Total material cost
$3.20
resin + consumables
Resin only
$1.80
40 mL
Consumables
$1.40
IPA, gloves, FEP
Cost per mL
$0.05
from $45.00/L
The resin cost formula
cost/mL = price_per_litre ÷ 1000 resin_cost = mL_used × cost/mL total = resin_cost + IPA + gloves + FEP_wear
Resin is priced per litre but consumed by the millilitre, and 1 mL equals 1 cm³. Your slicer’s volume estimate — model plus supports — is the figure to use. Failed prints and the resin left on the build plate and in the vat are real losses; if you want to cover them, raise the mL figure or add a line for them rather than guessing a percentage.
Consumables are yours to set
Related tools
- Filament cost calculator — the FDM equivalent, by weight.
- 3D printing cost calculator — roll resin into a full sell price with fees and margin.
- Methodology — how every layer is defined.